The flat-panel vehicle inspection bench is a testing device for testing the braking performance of the vehicle under test. It is a low-speed dynamic inertia braking testing device. Testing items: braking process curve, maximum braking force, braking force balance, front and rear braking force distribution ratio , Brake Deceleration, Brake Coordination, Suspension Vibration Curve, Suspension Damping, Dynamic/Static Wheel Weight, Side Slip Amount.
The flat-panel vehicle inspection bench is a testing device for testing the braking performance of the vehicle under test. It is a low-speed dynamic inertia braking testing device. Testing items: braking process curve, maximum braking force, braking force balance, front and rear braking force distribution ratio , Brake Deceleration, Brake Coordination, Suspension Vibration Curve, Suspension Damping, Dynamic/Static Wheel Weight, Side Slip Amount.
Equipment Features
Equipment Features The working panel is welded by a special process screen mesh, which effectively improves the adhesion coefficient of the panel surface, and the detection is convenient and fast. Easy to install, fast and easy to maintain.
The software interface is clear and clear, the operation is simple, and the braking force curve, damping curve and all test results can be printed.
Headlights, exhaust gas and other equipment can be connected as required to form a complete safety performance detection line, saving investment and can be networked with the upper computer (main control computer) to form a fully automatic detection system. Wide range of applications, the device can detect motor vehicles with different axle loads.
Technical parameter
Model (Two flat plates) | XKPB-2-3T | XKPB-2-10T | XKPB-2-15T |
Test axle load | 3000kg | 10000kg | 15000kg |
Brake force detection range | 2X(0-1500)N·M | 2X(0-4500)N·M | 2X(0-6000)N·M |
Side slip detection range | ±10mm | ||
Side slip detection accuracy | ±0.1m/km | ||
Measurement and control speed | 5-15km/h | ||
power supply | 220V 50Hz |
Model (Four flat plates) | XKPB-4-3T | XKPB-4-10T | XKPB-4-15T |
Test axle load | 3000kg | 10000kg | 15000kg |
Brake force detection range | 2X(0-1500)N·M | 2X(0-4500)N·M | 2X(0-6000)N·M |
Side slip detection range | ±10mm | ||
Side slip detection accuracy | ±0.1m/km | ||
Measurement and control speed | 5-15km/h | ||
power supply | 220V 50Hz |